Hydrodemolition Pump Orders
June 2006
Manufacture has commenced on recent contractor orders with Calder for 225 HP Multijet pump units for hydrodemolition applications.
Our sucessful past experience in concrete demolition pump packages working at 1500 bar has resulted in repeat orders from leading hydrodemolition companies expanding their production capabilities.

7 x Seawater & Power Fluid Injection Packages
May 2006
Calder has completed 'ontime' the supply of 7 x Zone 2 HDP750 containerised pump units for a floating production storage and offloading vessel (FPSO) project.
The pumps are powered by hazardous area Volvo Penta diesels installed with Pyroban flame arrestor package.
They will inject seawater into the reservoir for pressure management and power fluid pumps will pump stabalised oil down hole to get pumps to artificially lift reservoir fluids.

Export Well Service Package Design
November 2005
Calder has recently completed an export contract for supply a 600 horse power articulated trailer-mounted oilfield well service and cementing pump skid. This land-based oilfield application required a bespoke engineering solution to accomodate the various pumping duties requested by our client.
Capable of up to 2100 lpm, at pressures of up to 434 bar.

£3 Million Order Awarded
10/10/05
Calder have been successful in securing their biggest ever single value order for 7 of the largest pumps that Hammelmann currently make. Calder will take the HDP 750 pumps and package them into Diesel powered units to be located on a Floating Production Storage and Offloading vessel. Three of the pumps will be for Seawater Injection (181 Bar and 83 m3/hr) and four will be for Power Fluid pumping (330 Bar and 33m3/hr). The Seawater pumps will pumped into the reservoir for pressure management and the Crude Oil Power Fluid Pumps will pump the stabilised oil to down hole jet pumps to be used to lift reservoir fluids.

Offshore Zone 1 Methanol Pump Package
10/10/05
Calder delivered a Methanol pump package to a company in Aberdeen that will be used on an offshore platform. It will pump Methanol to a subsea tie-back in order to enhance the flow the production pipeline by reducing Hydrate formation. Using the Hammelman Process Pump range, the HDP 45 will run as a "jockey pump" on a near continuous basis whilst the HDP 175 will be run on well start up operations, both will deliver 690 Bar. Variable Speed Drives are used with both pumps to give a huge choice of pump speeds. This contract further builds upon the track record achieved in the Gulf of Mexico and Norway of using Hammelmann pumps for Methanol and represents the first such use in the UK offshore Oil and Gas Industry.

Zone 1 Methanol Pump Packages
10/10/05
Calder delivers another twin pump Methanol package. The two HDP 175's are to be located on an offshore platform to pump Methanol for flow assurance purposes, i.e. to eliminate Hydrate formation in the production pipeline that would otherwise block it. The two pumps will each be capable of 608 Bar and 4.8 m3/hr. Variable Speed Drives have been incorporated into the package.

Offshore Europe 2005
04/10/05
Thanks to all who attended Offshore Europe 2005. We hope to see you all again in 2007.

Visit the official Offshore Europe website.

Methanol Pump with Variable Speed
25/11/04
Calders commitment in offering a product range that meets the demanding requirements of pumping hazardous fluids, has seen the development of our methanol pump packages with variable speed. Our High-pressure reciprocating pump with Teflon spring-loaded packing suitable for methanol operation is driven by an Eexd electric motor and manually controlled belt variator. The system offers a constant 280 bar and a flow variance from 100 litres per hour to, 772 litres per hour. The Eexd shutdown switches provide protection for the pumping system and operators. These compact skid mounted units, comply with ATEX specifications.

Compact Rig Safe Pipeline Pressure Test Units
24/11/04
BJ Process & Pipelines Services Aberdeen, take delivery of two Calder designed and manufactured 100 HP diesel driven pipeline pressure test units complying to rigsafe specifications. The unit consisted of an Hammelmann HDP 70 series vertical reciprocating pump (ATEX approved) with bronze suction chamber, close coupled to a stage 2 diesel engine and supplied in a small foot-print container, (2.1M x 2.2M x 2.34M). Panel mounted functions, discharge turbine flow meter, providing instantaneous LCD read out. Pre-set pressure with dial type gauge, automatic bypass safety air valve to return the engine to tick over when pre-set pressure is achieved, the unit offers a performance of 167 lpm @ 210 bar.

Bespoke Site Trailer Mounted Pump Units for Petrochemical industries
23/11/04
Bespoke designs are a speciality of Calder Limited, before our experience design team get to work, understanding our clients needs and requirements are always our governing factor. Our remit was for a high-pressure, high flow, diesel driven, compact, lightweight, mobile unit, suitable for multiple cleaning operations in a petrochemical environment, the Solution...

A 230 kW diesel driven MULTIJET offering a performance of 1120 bar @ 111 lpm, mounted on a bespoke heavy-duty site trailer complete with turntable and towing hitch. Self contained 8 hour operation diesel tank, inlet water break tank, and stainless steel control panel with monitoring functions. The addition of the environmental protection hood made for the perfect solution.

High-Pressure Pumps for Automotive Applications
23/11/04
Electrically driven pump Systems designed for manual cleaning or operation with a six-axis robot for automatic skid & dolly cleaning applications.

" A high quality paint finish is an essential part of every MINI. The reliability and efficiency of our Calder `MULTIJET` fixed installation, ensures frequent and thorough cleanliness of our paint shop body carriers and paint booth exhaust plenums. In addition, Calder after sales, training and technical support has always been of the highest standard"
Mark Deabill, BMW Group

Cloth Washing Pump System for Filter Press Ranges Available Up to 100 bar & Up to 320 lpm
23/11/04
Cloth washing pump units for high-pressure cleaning of filter press plates. Splash lubricated triplex reciprocating plunger pump driven by a 50 Hz, 3 phase, 4 pole, 380/415 volt, IP 55 electric motor, direct or V belt driven, special voltages and 60 Hz frequency motors can be accommodated.
Assembled to a heavy-duty fabricated steel base frame, all units incorporate a pneumatically operated 3/2-way valve, high-temperature switch monitoring re-circulated water temperature, inlet filtration and connection to accommodate client requirements, pressure regulator valve, pulsation damping system and discharge hose.

Multijet 530-1000 - Containerised Rig Safe Sub sea well abandonment diesel pump unit.
04/08/04
Offering a performance of 1000 bar @ 205 lpm and having the latest electronic emission controlled engine providing 630 BHP, this unit is designed for cutting of super structures on disused offshore platforms and well abandonment projects. Utilising seawater and entrained abrasives this unit offers a cost effective and efficient process for offshore abandonment and decommissioning operations.

Ship Repair - UHP UK Ltd take delivery of Ultra-High Pressure Calder MultiJet
26/05/04
Stan Edge, MD of UHP (UK) Ltd. is convinced that he has made the right choice with his acquisition of the very latest design CALDER MULTIJET 160-3000 complete with the one wire technology HAMMELMANN Ergoblast® gun and pneumatically operated rotating cleaning head. Due to the high efficiency in coating removal rates that 3000 bar enables and the reliability of the MULTIJET, Stan Edge is even more confident of his company’s ability to take on difficult jobs at short notice and complete them within stringent time constraints.

Thermacon - New Product
17/05/04
Designed to convert Ultra High Pressure (3000 bar) cold water into Hot water, for applications such as graffiti removal, removal of oils, greases and tar based products, machinery and machine parts.
View PDF » 0.23mb

UK contract for cutting re-injection pumps supplied to stringent standards.
17/05/04
4 x Omega W500 reciprocating pump with a 450 kW Moeller electric motor for cutting slurry & seawater re-injection, manufactured in conjunction with 94/9EC ATEX (Zone 1) 97/23/EC PED and CE marked. Offering a performance of 4.5 BPM @ 255 bar & 2.4 BPM @ 345 bar complete with a bespoke stainless steel 78 dba noise attenuation hood and certified lifting frame.

Major Norwegian contract successfully designed and manufactured on schedule.
17/05/04
2 x ABB electric motor driven Omega W2250 reciprocating pump units for cutting slurry & seawater re-injection, manufactured in conjunction with 94/9EC ATEX (Zone 1) 97/23/EC PED and CE marked. Offering a performance of 36m³/hr @ 517 bar & 68m³/hr @ 275 bar complete with a bespoke stainless steel 78 dba noise attenuation hood and certified lifting frame

Calder design and manufacture 10 Zone 1 & 2 units.
17/05/04
Calder successfully secure an order for Zone 1 and Zone II containerised pump packages for a major UK client, utilising the Hammelmann reciprocating pump the units offer high-pressure twin and single gun operation for cleaning / surface preparation applications and low-pressure HOT WATER wash down offering temperatures up to 55ºC, all of these units were supplied with a comprehensive range of accessories.

5 x Rig Safe containerised Units supplied for northern-based UK client.
17/05/04
Multijet 160 Series Rig Safe machines designed and manufactured to stringent Rig Safe requirements for high-pressure cleaning applications, stage 2 diesel engines and the Hammelmann HDP124 pump package offering 18 l/pm @ 2800 bar. The container housed an integrated work bench/area, a comprehensive maintenance/repair tool kit and a complement of accessories.

Offshore Europe Exhibition Aberdeen 2003
17/05/04
Calder Limited would like to offer our thanks to our existing and prospectus clients who visited the stand at the Offshore Europe Exhibition 2003 in Aberdeen, the show was deemed a complete success and provided the opportunity to catch up with old friends and colleagues offering potential new business opportunities.

Calder Limited attain BS EN ISO 9001 : 2000 Certification
17/05/04
National Quality Assurance (NQA) Certification in the design, development, manufacture, commissioning, installation and servicing of high-pressure pumping systems and related activities. The supply of spare parts for the above systems.

Calder Limited attain BS EN ISO 14001 : 1996 Certification
17/05/04
National Quality Assurance (NQA) Certification in the design, development, manufacture, commissioning, installation and servicing of high-pressure pumping systems and related activities including the supply of spare parts.

Investor in People
17/05/04
Calder Limited is recognised as meeting national standards for effective investment in people. West Midlands Quality Centre.

« Back to Latest